Diagnostic R/F Table

 

This table is suitable for a wide range of Fluoroscopic and Radiographic examinations. Its compact size and sturdy construction makes it an ideal table for small hospitals and medical practices where space is a premium. The 2m long table top accommodates comfortably even the tallest patient and the 50cm vertical travel of the spot film device alloes examination of the largest patients without any discomfort. It tilting range from 90degrees vertical to -15degrees Trendelenburg makes the table an ideal solition for all types of study where gastro-intestinal contrast media are used. The long travel of the table top of +80 to -50cm combined with 50cm travel of the spot film device allows easy Fluoroscopic examination of all body parts without the need of repositioning the patient thus eliminating any

discomfort of traumatized patients.

 

An image intensifier of 6" or 9" can be fitted, or a fluoroscopic screen could be used instead. The image intensifier can be easily detached and parked in a convenient position to make the table easy to use for standard Radiographic examinations with overhead X-Ray tube. The internal bucky has a travel of 105cm to allow Radiographs of any part of the body. The image intensifier is supported by an overhead crane. A television chain with 12" or 14" monitor is attached to the image intensifier

Parts		DM-RFT-5
Table tiling	type	motor driven
	range	standard:+90°-15° option:+90°-20°
	speed	90°/20sec., 50/60Hz
Tabletop sliding	type	motor driven
	movement range	• horizontal:±50cm • upward[tilting position]:50cm • lateral:±11cm[option]
	speed	• 3.6cm/sec., 60Hz • 5cm/sec., 50Hz
Tabletop	material	Laminated 60mmT
	focal distance	41cmH
	filtration	less than 1.0mm AL. Eq. at 100KV
	tabletop to film	6.5cm
Buckty device	type	solenoid reciprocating
	grid	standard:40LPC 10:1,option:60LPC,70LPC
	cassette range	13×18cm~35×43cm[5×7"~14×17"]
	tarvel range	100cm
	AEC mode	lon chamber[option]
Spot film device	parking	slide parking from left to right
	locking	electromagnetic lock
	longitudinal movement	60cm
	transversal movement	±12cm
	vertical movement	14cm~15cm
	grid	standard:40LPC 10:1,option:60LPC,70LPC
	AEC mode	lon chamber[option]
Compression cone		manual operation
Field collimation	under couch	motor driven
Image assembly	Image intensifier	12",9",6" selectable
	TV Camera	CCD
	Monitor	23",17",15",14" selectable
	Trolley	four wheels, two shelves, 51cmL×44cmW×138cmH
Power requirement		220VAC,3KVA,50/60Hz, single phase
zWeight	net weight	650kg except image assembly
Dimensions		approx. 200cmL×72cmW×85cmH
Installation space	minimum	310cmL×158cmW×260cmH

 For the improvement, the design and specification is subject to change without a prior notice.

 

• Sturdy and compact design resulting in smooth movements for patient's comfort

• Wide range of Fluoroscopic and Radiographic examinations.

• Exceptional range of travel of the table top and spot film device.

• Smooth motor driven tilting from +90degrees to -15degrees Trendelenburg with an automatic 0 degree stop.

• +80 to -50cm table top movement allows whole body examinations.

• The low absorption table top has an equivalent less than 1mm Al at 100kVp.

• Short distance between the table top and the bucky.(6.5cm)

• Fluoroscopic screen can be provided upon request.

• Front loaded spot film device.

• Fully motorized spot film device capable of film divisions

   -18 x 24cm into 4 spots acroos

   -24 x 30cm into 2 parts

   -35 x 35cm single shot

• The spot film device has an automatic lock out against accidental double exposure.

• Motorized under table collimator with automatic collimation to reduce the radiation does to the patient.

• Economically designed spot film device allows an easy and convenient operation

• Advanced design of the spot film device results in a smooth and fast operation